Four new state hospital were commissioned in 2011 in Venezuela, all four as turnkey solutions.

The special element in these projects was that all four hospitals should have the same construction. This naturally simplifies the planning process and thus the project duration.

Together with partners, the HT Group completed the hospitals as turnkey solutions. From the design, planning up to the project management, service and maintenance the HT Group supplied a complete package. Thus, the customer had enormous cost security from the very beginning.

The first of the four hospitals was able to be completed in just a little more than 18 months.


The two-storey building is constructed in such a way that treatment rooms, patient care and the intensive care unit are on the ground floor,
the patient rooms on the first floor.
Four quarters form the basic construction concept. Each of these quarters stands for a different form of patient care. One quarter is formed by the OR area, one by the intensive care unit and sterilisation department, one by the emergency room and one quarter by the area
"Consulta Externa" which is similar to a day-care hospital.

The construction is repeated on the first floor, three of the quarters are formed by patient wards, one includes the complete administrative area. The outside facade is covered with touches of colour, constructional elements provide show on the interior and the construction ensures that the building does not heat up too much even when the sun is shining strongly. Situated in the middle of a green area, it fits perfectly into the landscape and provides the highest standards of efficiency due to the well thought-out pathways.

  • Completion: 2013
  • Competences: Turnkey solution  · Operating room  · Intensive care area
  • Solution: 6 ORs  · ICU  · corridors  · furniture
  • Material: Metal
zurück zur Übersicht

Building Information Modelling (BIM)

Building Information Modelling provides new approaches for the planning and realisation of both construction projects and the operation of buildings. 
The HT Group supports users of the BIM method with modules and interfaces in the planning. Our BIM components are being continuously developed and adjusted to the latest state of technology. Revit components for your BIM model can be requested using the following contact form. ?We will be happy to answer any questions you may have on the subject of BIM planning.

Revit-Part for BIM-Model